Untitled Document
전화상담 주문상품 바로가기
견적상담 바로가기
Untitled Document


Float type level switch
- Holizontal type
- Swing type
Displacement type level switch
Reed switch type float level switch
Magnetic float type level
Float operated type level switch
Tubular type glass level gauge
Flat & reflex type glass level gauge
Magnetic float type level gauge
Marine float level gauge
Self-powered content gauge
Dial type float level gauge
Capscitance type level switch
Flow switch
Non-flow alarm switch
Hight & overfill level alarm system
Electric pneumatic type tank level & draft gauging system
Bilge hight level alarm system
Oil & water detector
Electric pressure type level transmitter
Liquid level control system
Mobrey magnetic level switch
Press. Gauge / Thermometer / Temp. Transmitter / Thermocouple
I.S barrier / Lvel indicator
Selection valve / Gas valve
Home > Liquid Level Control System  
  The Liquid level control system (SDC-6000) is designed with the highest confidence and high accuracy by 2-wire system.  
  Values of resistances inserted in the guide pipe of float switch(LS-TM) are sensing by a float and relayed to the controller according to the liquid level. The controller converts the resistance signal into 4~20mA and the signal information is process chip.
Signals of Pump Start / Stop, automatic supply / drain, and high / low alarm are transmitted to each separate relay and controlled. Also, each signal is displayed by LED lamp built in the controller.
Type : SDC-6000
Power supply : 100~250VAC, 60-Hz or 24V
Max. temp : 65℃
Anti-Explosion : Exia ll C T6
Power consumption : 6.5W
Connect Capacity : AC250V/5A

level Sensor
Type : LS-TM
Certificate : KR, DNV, BV, LR, ABS
IP grade : IP67
Connect Capacity : 50A
Connection : JIS 5K65/5K80/5K100, Others  Float : SUS304/Synthetic rubber

* Ballast tank remote reading
* Draft remote reading
* Heeling and trim remote reading
* Fuel oil tank remote reading
* Waste waters, weels, locks, rivers, sea water, etc.

  Fresh Water, Sea Water, HFO, FO, Chemical Tank etc.
Untitled Document